1. Use professional customized low impedance components
2. Highly efficient output of magnetizing current, with the shortest current decay time
3. L-type (low impedance) power supply can reduce the heat generated by the magnetizing coil to 1/5 of the original
project | PC-2504TPL | PC-2506TPL | PC-2510TPL | Remark |
Input Power | AC220V±10% 50Hz single-phase two-wire | |||
Input Current | Max 30A | |||
Rated Power | Max 5KVA | |||
Charging voltage | 100～2500VDC±0.2%@full scale Repeatability error is ±1V@100～2500VDC | |||
Output Current | Max 30KA | |||
capacity | 400uF | 600uF | 1000uF | |
Max output energy | 1250J | 1875J | 3125J | |
Charge and discharge time | < 3 S | |||
Communicatio n interface | RS -485/ Ethernet | |||
weight | About 1 80KG | About 200KG | About 220 KG | |
Width, depth and height are approximately (mm) | 600*654*940 | 670*600*1500 | ||
1 | Ambient temperature: 0℃~40℃; |
2 | Ambient humidity < 80% (no condensation); |
3 | Plant height (column top height): 2.5m; |
4 | Ground load: >1 ton/㎡; |
5 | Factory equipment transportation door size: width 1500 × height 2000mm; |
6 | No dust, no oil smoke, no salt, no dripping water; |
7 | Avoid direct sunlight; |
8 | No flammable, corrosive liquids and gases; |
9 | No shock and high-frequency vibration; |
10 | Use location: Open workshop environment. |
