1. Low power consumption, high efficiency, stable discharge waveform, and can be used continuously for a long time;
2. The system adopts automatic control mode and can be used in conjunction with automation equipment and production lines;
3. Provide multiple protections and alarm outputs to ensure system security;
4. Easy to operate, with precise touch screen monitoring;
5. The magnetizing voltage can be adjusted from DC200 to 3500V;
6. Power off automatically releases the capacitance.
project | Technical Specifications | Remarks |
input power | AC380V ± 10% 50Hz two-phase (three wire system) | |
input current | Max 35A | |
rated power | Max 13KVA | |
Charging voltage of magnetizing power supply | 200-3500VDC ± 0.2% @ full range The repeatability error is ± 10V@200 ～3500VDC | |
output current | Max 25KA | |
Capacity of magnetizing power supply | 2000uF | |
Maximum output capacity of magnetizing power supply | 12250J | |
Charging time | 7S | |
Exterior color | RAL7035 | |
communication interface | RS-485/422 communication/network port | |
weight | About 290KG | |
size | W700*D700*H1625(mm) |
one | Environmental temperature: 0 ℃~40 ℃; |
two | Environmental humidity<80% (no condensation allowed); |
three | Factory height (column top height): 2m; |
four | Ground load:>500KG/㎡; |
five | Dimensions of the transportation door for factory equipment: width 1000 x height 2000mm; |
six | No dust, no oil fumes, no salt, no dripping water; |
seven | Avoid direct sunlight exposure; |
eight | No flammable or corrosive liquids or gases; |
nine | No impact or high-frequency vibration; |
ten | Location of use: Workshop open environment. |
