1. Low power consumption, high efficiency, stable discharge waveform, and can be used continuously for a long time;
2. The system adopts automatic control mode and can be used in conjunction with automation equipment and production lines;
3. Provide multiple protections and alarm outputs to ensure system security;
4. Easy to operate, with precise touch screen monitoring;
5. The magnetizing voltage can be adjusted from DC100 to 2500V;
6. Power off automatically releases the capacitance.
7. It has low impedance output function, narrower discharge pulse, and can effectively extend the service life of the coil.
project | Technical Specifications | Remarks |
input power | AC220V±10% 50Hz single-phase (Three wire system) | |
input current | Max 17A | |
rated power | Max 3.5KVA | |
Charging voltage of magnetizing power supply | two hundred ～ 2500VDC±0.2%@ full scale The repeatability error is ± 10V@200 ～ 2500VDC | |
output current | Max 30KA | |
Capacity of magnetizing power supply | 600uF | |
Maximum output capacity of magnetizing power supply | 1875J | |
Charging time | 3S | |
Exterior color | RAL7035 | |
communication interface | RS-485 / 422 Communication / Ethernet port | |
weight | about 140KG | |
size | W600*D820*H1200(mm) |
one | Environmental temperature: 0 ℃~40 ℃; |
two | Environmental humidity<80% (no condensation allowed); |
three | Factory height (column top height): 2.5m; |
four | Ground load:>1 ton/㎡; |
five | Dimensions of the transportation door for factory equipment: width 1500 x height 2000mm; |
six | No dust, no oil fumes, no salt, no dripping water; |
seven | Avoid direct sunlight exposure; |
eight | No flammable or corrosive liquids or gases; |
nine | No impact or high-frequency vibration; |
ten | Location of use: Workshop open environment. |
