1. Low power consumption, high efficiency, stable discharge waveform, and capable of long-term continuous operation;
2. The system adopts automatic control mode and provides reserved ports for easy upgrading and renovation;
3. Provide multiple protections and alarm outputs to ensure system safety;
4. Easy to operate, with precise touch screen monitoring;
5. The magnetizing voltage is adjustable from DC 200V to 2500V;
6. Automatically release capacitor power when shutting down, cutting off power, or experiencing faults;
Project | PC-4540TP | PC-4550TP | PC-4560TP | PC-4580TP | Remarks |
Input power | AC380V ± 10% 50Hz two-phase three wire | ||||
Input current | Max 50A | Max 60A | |||
Rated power | Max 19KVA | Max 25KVA | |||
Charging voltage | 200-4500VDC ± 0.2% @ full range The repeatability error is ± 1V@200 ～4500VDC | ||||
Output current | Max 25KA | ||||
Capacity | 4000uF | 5000uF | 6000uF | 8000uF | |
Max output energy | 40500J | 50625J | 60750J | 81000J | |
Charge and discharge time | ＜ 30S | ＜ 40S | |||
Exterior color | RAL7035 | customizable | |||
Communication interface | RS-485/Ethernet | ||||
Weight | About 550KG | About 630KG | About 700KG | About 850KG | |
The width, depth, and height are approximately | 900*1100*1625mm | 1000*1440*1625mm | |||
1 | Ambient temperature 0℃～40℃； |
2 | Ambient humidity < 80% (no condensation allowed); |
3 | Factory height (column top height): 2.5m; |
4 | Ground load:> 1 ton/square meter; |
5 | Size of transportation door for factory equipment: width 1500 x 2000mm high; |
6 | No dust, no oil fumes, no salt, no dripping water; |
7 | Avoid direct sunlight exposure ; |
8 | No flammable or corrosive liquids or gases; |
9 | No impact or high-frequency vibration; |
10 | Usage location: Workshop open environment. |
