Including magnetizing equipment, magnetizer, magnetizing coil, chiller, and magnetic flux meter (optional)
1. Wide compatibility range of rotor
2. Simple operation, high automation length
3. Capable of preventing misoperation
4. Easy to change models + Replacement car (optional)
5. The assembly line passes through the equipment, and the incoming material method of the assembly line tray
6. The magnetizing detection coil can be raised and lowered
7. Communication with magnetizing power supply, real-time monitoring of equipment status
8. Can embed magnetic flux detection and magnetization + Integrated magnetic flux
Project | Technical Specifications | Remarks |
input power | AC220V±5% 50/60Hz | |
input current | ＜ 20A | |
rated power | ＜ 5KW | |
Equipment noise | ≤ 75dB | Excluding instant magnetization |
Device dimensions | Approximately length, width, and height: 1050x1350x2200mm | Including electrical cabinet |
Equipment weight | ＜ 1000kg | |
changeover time | ≤ 30min | workwear + coil |
1 | Ambient temperature 0℃～40℃； |
2 | ambient humidity < 80% (no condensation allowed); |
3 | Factory height (column top height): 3.5m; |
4 | Ground load:> 2 tons/square meter; |
5 | Size of transportation door for factory equipment: width 1500 x 2500mm high; |
6 | Gas source: Air pressure 0.4～0.6Mpa , Flow rate of 0.3m3/ min; |
7 | No dust, no oil fumes, no salt, no dripping water; |
8 | Avoid direct sunlight exposure ; |
9 | No flammable or corrosive liquids or gases; |
10 | No impact or high-frequency vibration; |
11 | Usage location: Workshop open environment. |
Loading → Pressing Down → Magnetizing → Lifting Up → Magnetic Flux Detection → Unloading
